Comparative study between 1-way and 2-way coupled fluid-structure interaction in numerical simulation of aortic arch aneurysms.

Hemodynamic forces are related to pathological variations of the cardiovascular system, and numerical simulations for fluid-structure interaction have been systematically used to analyze the behavior of blood flow and the arterial wall in aortic aneurysms. This paper proposes a comparative analysis of 1-way and 2-way coupled fluid-structure interaction for aortic arch aneurysm. The coupling models of fluid-structure interaction were conducted using 3D geometry of the thoracic aorta from computed tomography. Hyperelastic anisotropic properties were estimated for the Holzapfel arterial wall model. The rheological behavior of the blood was modeled by the Carreau-Yasuda model. The results showed that the 1-way approach tends to underestimate von Mises stress, displacement, and strain over the entire cardiac cycle, compared to the 2-way approach. In contrast, the behavior of the variables of flow field, velocity, wall shear stress, and Reynolds number when coupled by the 1-way model was overestimated at the systolic moment and tends to be equal at the diastolic moment. The quantitative differences found, especially during the systole, suggest the use of 2-way coupling in numerical simulations of aortic arch aneurysms due to the hyperelastic nature of the arterial wall, which leads to a strong iteration between the fluid and the arterial wall.

Efficacy of ultrasound vector flow imaging in tracking omnidirectional pulsatile flow.

BACKGROUND: Ultrasound vector flow imaging (VFI) shows potential as an emerging non-invasive modality for time-resolved flow mapping. However, its efficacy in tracking multidirectional pulsatile flow with temporal resolvability has not yet been systematically evaluated because of the lack of an appropriate test protocol. PURPOSE: We present the first systematic performance investigation of VFI in tracking pulsatile flow in a meticulously designed scenario with time-varying, omnidirectional flow fields (with flow angles from 0° to 360°). METHODS: Ultrasound VFI was performed on a three-loop spiral flow phantom (4 mm diameter; 5 mm pitch) that was configured to operate under pulsatile flow conditions (10 ml/s peak flow rate; 1 Hz pulse rate; carotid pulse shape). The spiral lumen geometry was designed to simulate recirculatory flow dynamics observed in the heart and in curvy blood vessel segments such as the carotid bulb. The imaging sequence was based on steered plane wave pulsing (-10°, 0°, +10° steering angles; 5 MHz imaging frequency; 3.3 kHz interleaved pulse repetition frequency). VFI's pulsatile flow estimation performance and its ability to detect secondary flow were comparatively assessed against flow fields derived from computational fluid dynamics (CFD) simulations that included consideration of fluid-structure interactions (FSI). The mean percentage error (MPE) and the coefficient of determination (R2 ) were computed to assess the correspondence of the velocity estimates derived from VFI and CFD-FSI simulations. In addition, VFI's efficacy in tracking pulse waves was analyzed with respect to pressure transducer measurements made at the phantom's inlet and outlet. RESULTS: Pulsatile flow patterns rendered by VFI agreed with the flow profiles computed from CFD-FSI simulations (average MPE: -5.3%). The shape of the VFI-measured velocity magnitude profile generally matched the inlet flow profile. High correlation exists between VFI measurements and simulated flow vectors (lateral velocity: R2  = 0.8; axial velocity R2  = 0.89; beam-flow angle: R2  = 0.98; p < 0.0001 for all three quantities). VFI was found to be capable of consistently tracking secondary flow. It also yielded pulse wave velocity (PWV) estimates (5.72 ± 1.02 m/s) that, on average, are within 6.4% of those obtained from pressure transducer measurements (6.11 ± 1.15 m/s). CONCLUSION: VFI can consistently track omnidirectional pulsatile flow on a time-resolved basis. This systematic investigation serves well as a quality assurance test of VFI.

Influence of hemodialysis blood flow rate on the thrombogenic potential in patients with central venous catheters.

In this study we apply methods to determine the tendency for thrombus formation in different central venous catheters (CVC) models associated with flow rate variation. To calculate the thrombogenic potential, we proposed a new numerical model of the platelet lysis index (PLI) equation. To compare the results of PLI and flow rate in different models of catheters, numerical calculations were performed on three different tips of CVC. The results showed that the PLI increases as a power function of the flow rate independent of the type of CVC. This study evidenced that the higher the blood flow rate used in the catheter, the greater the potential for thrombus formation. The PLI computed at the catheter outlet presented higher values when compared to the values computed at the vein outlet indicating that the blood flow through the CVC arterial lumen presents a proportionally larger thrombogenic potential when compared to the blood flow that leaves the vein towards the atrium. This finding may have consequences for clinical practice, since there is no specific flow value recommended in the catheter when the hemodialysis machine is turned on, and with this equation it was possible to demonstrate the thrombogenic potential that the flow rate can possibly offer.

Activated platelets in central venous catheters: a flow cytometry and numerical simulation approach

The central venous catheter that is inserted in patients undergoing hemodialysis can cause hemodynamic instability and trigger complications such as thrombus formation. The objective of this study was to investigate hemostatic and numerical influences on thrombus formation in patients undergoing hemodialysis with a central venous catheter. Participants were assigned to three groups: I: clinical and laboratorial healthy individuals matched by sex and age (controls); II: participants after one month of insertion of the catheter and III: participants after 4 months of insertion of the catheter. Platelet activation was investigated by GPIIb/IIIa and p-selectin expressions using flow cytometry. A three-dimensional model of the catheter was constructed in the numerical simulation for the calculation of partial differential equation of a platelet activation model. A significant difference was detected by the expression of p-selectin comparing the group I (33.42 ± 4.74), group II (40.79 ± 5.54) and group III(51.00 ± 7.21) (p < 0.0001). The median values for GPIIb/IIIa were 10426 (10029-10721), 13921 (13412-15652) and 19946 (18714-21815) after catheter insertion (p < 0.0001), for groups I, II and III, respectively. Excluding the first arterial orifice, venous orifices tend to have greater platelet activation when compared to the other arterial orifices. The results of this study showed the influence of arterial and venous lateral orifices in stimulating the development of thrombi associated with the activation of platelet markers the longer the catheter was used.

Effect of the expression of CD62P and thrombin generation on patients using central venous catheters for hemodialysis.

The formation of thrombi in medical devices that come into contact with blood is a common cause of increased morbidity and mortality. Prolonged use of central venous catheters (CVCs) may cause high infection rates or compromise CVC patency due to thrombus development. In this study, we sought insights into possible changes in the hemostatic system during prolonged use of inserted CVCs for hemodialysis by assessing platelets by CD62P and CD41a expression and the potential for thrombin generation (TG). This study included patients with chronic renal failure who were undergoing hemodialysis three times a week using a CVC, and healthy subjects as controls. The participants were distributed into three groups: Group 1: clinically and laboratorially healthy individuals matched by sex and age to the patients (controls); Group II: patients who had completed 1 month of CVC insertion; and Group III: the same patients after they had completed 4 months of CVC insertion. Platelet activation analysis and TG evaluation were performed using blood samples obtained through two different accesses, that is, through a peripheral vein and directly from the CVC lumen. The data showed platelet activation and an increase in the generation of thrombin, particularly after 4 months of CVC use. The results also indicated that insertion of the catheter into the blood stream stimulated the intrinsic rather than the extrinsic pathway. Taken together, the data showed a direct relationship between the use of CVCs in hemodialysis patients and a state of hypercoagulability, most likely associated with endothelial damage and the contact of the medical device with blood components such as platelets and coagulation factors.